← Blog

Hydro Jetting in Longmont: When Snaking Is Not Enough — 2026 Guide

When a drain snake just punches a hole through the clog and the same drain backs up again two months later, the underlying problem is buildup on the inside of the pipe — not just a one-off blockage. Hydro jetting uses high-pressure water (3,500 to 4,000 PSI) sprayed through a specialized nozzle to scour the pipe interior back to bare walls, cutting tree roots, dissolving grease, and clearing scale that a snake cannot touch. For Longmont homeowners with recurring drain problems, tree-root intrusion, or older lines, hydro jetting is the right call. This guide explains when it works, what it costs, what is involved, and how it compares to snaking.

What Hydro Jetting Actually Does

A hydro jetter is a high-pressure water pump connected to a long flexible hose with an interchangeable nozzle at the end. The nozzle is pushed into the drain or sewer line, and water sprays forward (to break through the clog) and backward (to propel the hose and scour the pipe walls). Pressure is typically 3,500 to 4,000 PSI for residential work — enough to cut tree roots, blow out grease, and remove scale.

The result is the inside of the pipe cleaned back to its original interior, not just a hole punched through the blockage. That is the structural difference between hydro jetting and snaking.

Hydro Jetting vs. Drain Snaking

FactorDrain Snaking (Cabling)Hydro Jetting
ActionCable with cutting head punches through blockageHigh-pressure water scours entire pipe interior
Best forOne-off clogs (hair, single object, soft blockage)Recurring clogs, tree roots, grease, scale
Removes buildup on pipe walls?NoYes
Removes tree roots?Partial — cuts but leaves residueYes, cuts and flushes
Repeat clog likelihoodHigh if underlying buildup remainsLow

When to Hydro Jet Instead of Snake

  • Recurring clogs in the same drain — same fixture backing up monthly is a buildup problem, not a one-off.
  • Tree roots in the sewer line — confirmed by camera. Common in older Longmont neighborhoods with mature cottonwoods, maples, or willows near the sewer lateral.
  • Grease buildup in kitchen lines — restaurants and heavy home cooks. Snaking only delays the next clog.
  • Scale buildup in older galvanized or cast-iron pipes — the pipe interior diameter has shrunk to half its original size.
  • Multiple drains backing up together — the problem is in the main line, not a branch. Almost always a hydro-jetting job.
  • Foul odor that returns after snaking — biofilm on pipe walls survives snaking and keeps producing the smell.

What Is Included in a Goodfellas Hydro Jetting Service

  • Pre-jet camera inspection. Confirms pipe material, condition, and clog location. Spots breaks, bellies, or damage that may affect jetting safety.
  • High-pressure jetting pass. Up to 4,000 PSI with the right nozzle for the job — root cutter, grease-cutter, scale-removal, or general flush.
  • Post-jet camera verification. Confirms the pipe is clear and clean. You see the before-and-after.
  • Recommendations. If the camera shows damage that jetting cannot fix (cracked pipe, root intrusion through a break), we quote the repair separately rather than letting the problem come back.
  • Cleanup. We bag and remove the debris flushed out. Driveways and sidewalks rinsed.

Is Hydro Jetting Safe for Older Pipes?

Hydro jetting is safe for cast iron, copper, and PVC pipes in sound condition — even with significant scale or root intrusion. Three pipe types need pre-jet evaluation:

  • Old clay tile sewer lateral. Common in Longmont homes pre-1960. Camera-confirm condition before jetting; cracked tile may need repair first.
  • Galvanized steel. Heavily corroded galvanized can be too fragile for full pressure. Reduce PSI or recommend repipe.
  • Orangeburg (tar-paper composite). Pre-1970s. Almost always too fragile for jetting. Camera-confirm and recommend repipe.

The pre-jet camera inspection answers all three questions before we turn on the pump.

Why Longmont Homes Need Hydro Jetting

Three local factors push Longmont homes toward hydro jetting more often than greenfield neighborhoods:

  • Mature trees. Many older Longmont neighborhoods have cottonwoods, maples, and willows with aggressive root systems that find sewer joints.
  • Older sewer laterals. Clay tile and cast iron from the 1950s-1970s common. Scale and root intrusion accumulate over decades.
  • Hard water. Front Range water contributes to scale buildup inside drain and sewer pipes.

Why Choose Goodfellas for Hydro Jetting in Longmont

  • Camera inspection included on every jet job — before and after.
  • Fully licensed, insured, and certified for plumbing work in Colorado.
  • Same-day service for recurring backups, based on technician availability.
  • One truck, one crew — if jetting reveals pipe damage, our plumbers quote the repair on the same visit.
  • Up-front written quoting — no surprise charges.
  • Multiple nozzle types on every truck: root cutter, grease-cutter, scale removal, general flush.
  • Quote from another plumber? Ask about a free second opinion.

Frequently Asked Questions

What is hydro jetting?

Hydro jetting uses high-pressure water (typically 3,500 to 4,000 PSI) sprayed through a specialized nozzle to scour the inside of sewer and drain lines. It cuts through tree roots, dissolves grease and scale, and clears stubborn clogs that a traditional drain snake cannot remove. The result is pipe walls cleaned back to bare interior — not just a hole punched through the blockage.

When should I hydro jet instead of snaking?

Hydro jet when you have recurring clogs in the same drain, tree-root intrusion (confirmed by camera inspection), grease buildup in kitchen lines, scale buildup in older galvanized or cast-iron pipes, or commercial-grade buildup that a snake just punches through. Snaking is fine for one-off clogs in a single fixture; hydro jetting is the answer when the underlying pipe interior is fouled.

Is hydro jetting safe for older pipes?

Hydro jetting is generally safe for cast iron, copper, and PVC pipes that are structurally sound. Older clay tile or fragile galvanized pipes may need a camera inspection first to confirm the pipe can handle the pressure. We always run the camera before jetting and lower the pressure or recommend a different approach if the pipe condition warrants it.

Does hydro jetting remove tree roots from my sewer line?

Yes. A specialized root-cutting nozzle on the hydro jetter cuts tree roots growing into sewer lines, then the high-pressure water flushes the cut roots out to the city main. For severely root-bound lines we follow jetting with a camera inspection to confirm clearance and may recommend a spot repair or line replacement if the pipe is damaged.

Schedule Hydro Jetting in Longmont Today

Stop snaking the same drain every two months. Call or text Goodfellas at (303) 457-4328 or request service online. We serve Longmont and the entire Denver metro with hydro jetting, camera inspection included.

REQUEST HYDRO JETTING SERVICE →

Who we are

Goodfellas Heating, Cooling, Plumbing & Electric is a locally owned heating, cooling, plumbing and electrical company in Northglenn, Colorado, in business since 2012. We are a Lennox dealer. Our HVAC work is fully licensed with Denver-metro municipalities, cities and counties, our plumbing and electrical work is licensed by the State of Colorado, and our factory-trained technicians have completed more than 100,000 jobs. Every article is written and reviewed by the technicians who do this work in Denver-area homes every day. More about Goodfellas →

Want a pro to take a look?

Our factory-trained technicians serve homes across the Denver metro with upfront pricing and repairs guaranteed for a year.

Need help at home?

Call or text (303) 457-4328

★ 4.6 on Google · Upfront pricing · 1-year repair guarantee

More from the blog